C90800 Product description:
Here’s the product description with a brief introduction:
C90800 High-Tin Bronze: Premium Alloy for Industrial Excellence
C90800 is a high-performance copper-tin alloy engineered for demanding industrial applications. This versatile material offers a unique combination of properties that make it indispensable in various sectors:
- Copper alloy with 11-13% tin content
- Высокая прочность и отличная износостойкость
- Ideal for heavy-load, low-speed applications
- Enhanced hardness and corrosion resistance
- Common uses: industrial gears, marine components, bearings
- Good machinability and casting properties
- Available in bars, tubes, plates, and other forms
- Suitable for demanding, high-durability applications
- Complies with drinking water safety standards
- Balances strength, wear resistance, and corrosion protection
C90800 High-Tin Bronze: A Comprehensive Product Guide
C90800 high-tin bronze is a copper-based alloy renowned for its exceptional strength, wear resistance, and performance under heavy loads and low speeds. This comprehensive guide delves into the various aspects of C90800 tin bronze, including its composition, properties, applications, and manufacturing processes.
Химический состав
The chemical composition of C90800 tin bronze is crucial to its performance characteristics. The following table outlines the elemental breakdown and the role of each element:
Элемент | Процентный диапазон | Роль в сплаве |
---|---|---|
Медь | 85.00 – 89.00% | Primary matrix, provides good thermal and electrical conductivity |
Олово (Sn) | 11.00 – 13.00% | Increases strength and wear resistance, improves corrosion resistance |
Свинец (Pb) | 0.25% max | Enhances machinability, reduces friction |
Цинк (Zn) | 0.25% max | Increases strength, improves fluidity |
Железо (Fe) | 0.15% max | Refines grain structure, increases strength |
Фосфор (Р) | 0.30% max* | Increases hardness, improves fluidity |
Никель (Ni) | 0.50% max | Enhances strength and corrosion resistance |
Алюминий (Al) | 00,005% макс. | Acts as a deoxidizer, improves mechanical properties |
Сера (S) | 00,05% макс. | Impurity, typically kept at low levels |
Сурьма (Sb) | 0.20% макс. | Increases hardness, improves creep resistance |
Кремний (Si) | 00,005% макс. | Increases strength, improves fluidity |
*Note: For continuous castings, P shall be 1.5% max.
Механические свойства
The mechanical properties of C90800 tin bronze contribute to its suitability for various industrial applications:
Имущество | Формование и изгиб |
---|---|
Предел прочности (мин) | 35 ksi (241 MPa) |
Предел текучести (мин) | 17 ksi (117 MPa) |
Удлинение (мин) | 10% |
Твердость по Бринеллю | 65 BHN (typical) |
Плотность | 0.317 lb/in³ at 68°F |
Производительность при различных температурах
While specific temperature-related data for C90800 is not provided, tin bronzes generally exhibit good performance across a range of temperatures:
Диапазон температур | Характеристики производительности |
---|---|
Низкая температура (от -50°C до 0°C) | Maintains strength and ductility |
Комнатная температура (от 0°C до 30°C) | Оптимальная производительность для большинства приложений |
Повышенная температура (от 30°C до 200°C) | Retains strength, slight decrease in hardness |
High Temperature (200°C to 400°C) | Gradual decrease in strength, still usable for some applications |
Промышленные приложения
C90800 tin bronze finds use in various industries due to its unique properties:
Промышленность | Приложения |
---|---|
Промышленные | Speed reducers, worm gears |
морской | Крыльчатки насосов, корпуса клапанов |
Строительство | Подвижные элементы моста, поворотные платформы для мостов |
Автомобильная промышленность | Piston rings, bushings |
General Engineering | High-strength bearings, steam fittings |
Доступность формы и размера
C90800 tin bronze is available in various shapes and sizes to suit different manufacturing needs:
Втулки | Диапазон размеров | Common Applications | Примечания |
---|---|---|---|
Твердые стержни | 25mm – 150mm diameter | Bearings, gears, propeller shafts | Custom lengths available, standard length 3660mm |
Трубы | 25mm – 150mm outer diameter | Bushings, pump bodies, valves | Wall thickness varies, consult manufacturer |
Тарелки | 6mm – 100mm thickness, up to 1000mm width | Wear plates, flanges, large bearings | Can be cut to specific sizes |
Поковки | Up to 2000kg | Large machinery parts, marine components | Возможны индивидуальные формы |
Отливки | No size limit | Pump casings, valve bodies, gearboxes | Complex shapes possible, consider mold design |
ВОЕННЫЙ | 1mm – 10mm diameter | Welding wire, small springs | Usually supplied in coils |
Hexagonal Bars | 10mm – 60mm across flats | Bolts, nuts, special fasteners | Standard length 3000mm |
Square Bars | 10mm – 100mm side length | Tools, dies, machine parts | Custom lengths available, standard 3000mm |
Additional information:
- All shapes can be customized to customer specifications
- Tolerances can meet ISO f7 grade
- Surface finishing services available (e.g., polishing, nickel plating)
- Longer lead times may be required for large castings and forgings
- Minimum order quantities may apply for certain special sizes
Производственные стандарты
C90800 tin bronze complies with several important standards and regulations:
Standard/Regulation | Описание |
---|---|
Федеральный закон о безопасной питьевой воде (SDWA) | Ensures material safety for drinking water applications |
S. 3874 Федеральный закон о снижении содержания свинца в питьевой воде | Limits lead content in drinking water systems |
Калифорния AB1953 | State-specific regulation for lead content in plumbing |
Закон Вермонта 193 | State-specific regulation for lead in consumer products |
Международные стандарты и соответствующие оценки
While specific international standards for C90800 are not provided in the given information, tin bronzes often have equivalent or similar grades in different countries:
Страна/регион | Стандарт | Эквивалентный/аналогичный класс |
---|---|---|
Соединенные Штаты Америки | АСТМА | C90800 |
Европа | НА | CuSn12 |
Япония | JIS | CAC904 |
Китай | ГБ | ЗЦуСн12 |
Соединенное Королевство | BS | PB4 |
Сварочные характеристики
Welding tin bronze requires specific techniques due to its composition:
Метод сварки | высокая проводимость | Примечания |
---|---|---|
Газо-вольфрамовая дуговая сварка (GTAW) | Хороший | Preferred for thin sections |
Газо-дуговая сварка (GMAW) | Хороший | Подходит для более толстых секций. |
Дуговая сварка защищенного металла (SMAW) | высокая проводимость | Требуется правильный выбор электродов. |
высокая проводимость | Бедных | Не рекомендуется из-за высокого тепловложения. |
Характеристики обработки
C90800 can be processed using various methods:
Процесс | высокая проводимость | Примечания |
---|---|---|
Обработка | Хороший | Moderate machinability |
Формирование | высокая проводимость | Ограниченная формуемость из-за высокого содержания олова. |
Кастинг | Превосходно | Широко используется при литье |
Ковка | Бедных | Not typically forged due to high tin content |
все более совершенные и новые улучшенные сорта литейной стали
Polishing C90800 can enhance its appearance and surface properties:
Метод полировки | Эффективность | Примечания |
---|---|---|
Механическая полировка | Хороший | Достигает высокого блеска |
Химическая полировка | высокая проводимость | Can be used for complex shapes |
Электрополировка | Хороший | Обеспечивает гладкое и блестящее покрытие. |
Термическая обработка
Heat treatment can modify the properties of C90800:
Термическая обработка | Цель | Процесс |
---|---|---|
Отжиг | Снятие стресса, смягчение | Heat to 600-650°C, slow cool |
Тушение | Закалка | Rapid cooling from 760-870°C |
Темперирование | Stress relief after quenching | Heat to 200-300°C, air cool |
Холодная обработка
Cold working can alter the mechanical properties of C90800:
Холодный метод обработки | Влияние на свойства |
---|---|
Холодная прокатка | Увеличивает прочность, снижает пластичность |
Холодный рисунок | Улучшает качество поверхности, точность размеров. |
Холодная ковка | Limited applicability due to high tin content |
Преимущества и недостатки
C90800 tin bronze has several pros and cons:
Преимущества | Недостатки |
---|---|
Высокая прочность | Relatively high cost |
Отличная износостойкость | Ограниченная формуемость |
Хорошая коррозионная стойкость | Более низкая электропроводность, чем у чистой меди |
Низкий коэффициент трения | Potential for tin pest at very low temperatures |
Подходит для тяжелых грузов | Не подходит для высокоскоростных приложений. |
Похожие продукты и сравнение
C90800 is part of a family of tin bronzes. Here’s a comparison with similar alloys:
Сплав | Cu% | Sn% | Другие элементы | Ключевые различия |
---|---|---|---|---|
C90800 | 85-89 | 11-13 | Pb, Zn, Fe, P, Ni | Базовый сплав для сравнения |
C90700 | 88-90 | 10-12 | Pb, Zn, Ni | Slightly lower tin, higher copper |
C91000 | 83-85 | 15-17 | Pb, Zn | Higher tin content, increased hardness |
C91100 | 82-84 | 16-18 | Pb, Zn | Еще более высокое олово, максимальная твердость |
C90500 | 86-89 | 9-11 | Pb, Zn, Ni | Меньшее олово, повышенная пластичность |
Вывод
- C90800 high-tin bronze is a versatile alloy with unique properties
- High strength, excellent wear resistance, and good corrosion resistance
- Suitable for heavy loads and low-speed applications
- Wide range of industrial applications
- Available in various shapes and sizes
- Properties can be modified through heat treatment and cold working
- Relatively high cost
- Ограниченная формуемость
- Более низкая электропроводность, чем у чистой меди
- Potential for tin pest at very low temperatures
- Consider specific requirements, operating conditions, and economic factors when selecting
- Compare with similar tin bronze alloys for optimal choice
- Valuable material for engineers and designers
- Proven track record in various industries
- Strong candidate for demanding applications in modern engineering and manufacturing