C67410 Manganese Bronze Alloy

Much like other manganese bronze alloys, C67410 resists corrosion well. When used in bearings, C67410 can handle high speeds and heavy loads. By including manganese, iron, and aluminum, this alloy resists seizing.

C67410 has high strength for use in heavy-load applications. Some typical uses include:

  • Manganese Bronze Bushings
  • Manganese Bronze Cams
  • Manganese Bronze Connecting Rods
  • Manganese Bronze Cylinder Liners
  • Manganese Bronze Gears
  • Manganese Bronze Hydraulic Piston Shoes
  • Manganese Bronze Shafts
  • Manganese Bronze Valve Guides & Chain Guides
  • Manganese Bronze Wear Plates

범주:

C67410 Introduction

Copper alloys are extremely popular as they have strong corrosion resistance to many types of substances and environments. They are resistant to fresh water, steam, marine and industrial atmospheres, non-oxidizing minerals, caustic solutions, organic acids, moist ammonia, halogens, soils, and sulfides.

Copper alloys, however, have poor resistance to inorganic acids. The following datasheet discusses the chemical composition and properties of copper UNS C67410.

화학적 구성 요소

The chemical composition of copper UNS C67410 is given in the following table.

요소콘텐츠 (%)
구리, Cu55.5 – 59
니켈, Ni2
알루미늄, 알1.3 – 2.3
망간, 미네소타1.0 – 2.4
철, 철1
Lead, Pb0.8
실리콘, 예0.7 – 1.3
Tin, Sn0.5
아연, Zn균형

기계적 성질

The mechanical properties of copper UNS C67410 are tabulated below.

속성미터법장엄한
인장 강도483-750 MPa70 -109 ksi
항복 강도234-430 MPa34 – 62 ksi
연장28-10%28-10%
경도, 브리넬140-200140-200

(measured at room temperature, 68 F (20 C)

성질Section
크기
추운
Work
Typ/
온도인장
생산하다

(0.5% ext.
under load)
생산하다

(0.2%
offset)
생산하다

(0.05%
offset)
그만큼록웰
경도
Vickens
Hard.
브리넬
Hard.
전단
Fatigue
Strength*
Izod
타격
에.%NS크시크시크시크시%NSNS30T5005003000크시크시ft-lb
mm.MPaMPaMPaMPaMPaMPa제이
막대
O600.750일반68703428780.0
192048323428780.0
술집
M300.00일반68783826780.0
0.02053826226780.0
막대
HR020.750일반689255208748290.0
192063437920873312000.0
술집
HR020.00일반68854524830.0
0.02058631024830.0

*Fatigue Strength: 100 x 10 6cycles,
unless indicated as [N]X 106.

Other Designations

Other designations that are equivalent to copper UNS C67410 include:

  • SAE J461
  • SAE J463

애플리케이션

Copper UNS C67410 finds application in:

  • Cams
  • 기어
  • 샤프트
  • 부싱
  • Wear plates
  • Cylinder liners
  • Connecting rods
  • Food conveyor chain
  • Hydraulic piston shoes
  • Valve guides and chain guides