C95800 Nickel Aluminum Bronze Tubes: Comprehensive Specifications and Application Guide

1. 화학성분

The C95800 nickel aluminum bronze alloy follows strict compositional requirements as per ASTM B150/B150M standard:

요소	Composition Range (%)
구리	79.0 – 81.5
니켈(Ni)	4.0 – 5.0
알루미늄(Al)	8.5 – 9.5
철(Fe)	3.5 – 4.5
망간(Mn)	0.8 – 1.5
실리콘(Si)	0.10 최대
납(Pb)	0.03 최대

2. 기계적 성질

Standard mechanical properties at room temperature:

재산	값	구상화 소둔 및 연화 처리
인장 강도	585-760	MPa
항복 강도	245-485	MPa
연장	15 (min)	%
경도	160-190	브리넬
Impact Strength	34	Joules
밀도	7.64	g/cm³

3. Standard Dimensions

Common available sizes for C95800 tubes:

Outer Diameter (mm)	Wall Thickness (mm)	Length (m)
15.88 – 25.4	1.65 – 3.38	3 – 6
31.75 – 50.8	2.11 – 4.78	3 – 6
63.5 – 101.6	3.18 – 6.35	3 – 6
114.3 – 219.1	4.78 – 12.7	3 – 6
273.0 – 406.4	6.35 – 19.1	3 – 6

4. Physical Properties

재산	값	구상화 소둔 및 연화 처리
녹는 범위	1030-1060	°C
열 전도성	42	W/m·K
전기 저항	13.3	μΩ·cm
열팽창계수	16.2	μm/m·K
Maximum Operating Temperature	315	°C

5. Key Applications

5.1 Marine Industry Applications

Propeller shaft sleeves
Pump housings
Valve bodies
Sea water piping systems
Marine hardware components

5.2 Oil & Gas Industry

Offshore platform components
Subsea equipment
Pipeline fittings
펌프 구성 요소
Heat exchanger tubes

5.3 Chemical Processing

Chemical transport lines
Process equipment
Reaction vessels
Heat exchanger tubes
Distillation equipment

6. Corrosion Resistance Properties

Performance ratings in various environments:

환경	Resistance Rating	노트
바닷물	훌륭한	Superior resistance to chloride attack
민물	훌륭한	Low corrosion rates
산업적인 분위기	매우 좋은	Forms protective oxide layer
Acids (mild)	좋은	Depends on concentration
알칼리	매우 좋은	Suitable for most alkaline environments

7. Manufacturing Standards

Applicable international standards:

기준	설명
ASTM B150/B150M	Standard Specification for Aluminum Bronze Rod, Bar, and Shapes
ASTM B171/B171M	Standard Specification for Copper-Alloy Plate and Sheet
ASTM B467	Standard Specification for Welded Copper-Nickel Pipe
MIL-C-24679	Military Specification for Copper-Nickel-Aluminum Bronze

8. Quality Testing Requirements

Test Type	방법	빈도
화학 분석	Spectrographic Analysis	Per Heat
Mechanical Testing	Tensile Test	Per Lot
Dimensional Check	Precision Measurement	100%
Non-destructive Testing	Ultrasonic Testing	As Required
Hydrostatic Test	Pressure Testing	100%

9. Advantages and Benefits

Key benefits of C95800 tubes:

Superior corrosion resistance in marine environments
Excellent mechanical strength
우수한 내마모성
High impact strength
Superior fatigue resistance
우수한 가공성
Excellent weldability

10. Storage and Handling

Storage recommendations:

측면	Requirement
온도	Room temperature
Humidity	< 60% relative humidity
Storage Position	Horizontal on suitable racks
Protection	Cover from dust and debris
Identification	Clear marking and tagging

11. Certifications Required

Common certification requirements:

Certificate Type	설명
Material Test Certificate (EN 10204 3.1)	Chemical and mechanical properties
Manufacturing Process Certificate	Production process details
Quality System Certificate	ISO 9001:2015 compliance
Non-destructive Test Reports	As per customer specification
Third-Party Inspection Reports	When required

12. Maintenance Recommendations

Maintenance Aspect	빈도	Action
Visual Inspection	계간지	Check for surface defects
Thickness Measurement	Annually	Ultrasonic testing
청소	필요에 따라	Remove deposits
Corrosion Check	Semi-annually	Inspect critical areas

This comprehensive guide provides essential information for engineers, procurement professionals, and technical specialists working with C95800 nickel aluminum bronze tubes. For specific applications or requirements, please consult with qualified metallurgists or engineering professionals.

C95800 니켈 알루미늄 청동 튜브: 종합 사양 및 적용 가이드

1. 화학성분

2. 기계적 성질

3. Standard Dimensions

4. Physical Properties