NM500耐食鋼板・シート
- 鋼種:NM500
- 厚さ:2mm-120mm
- エグゼクティブスタンダード：GB/EN/リクエストに応じて
- 配送状況:Q+T
- 製品説明：ライオンメタルの耐食鋼板/シートグレードは、国内のNM360、NM400、NM450、NM500、NM550、NM600、NM650のバルク販売、倉庫、切断、物流に取り組んでいます。
NM500 Introduction
NM500 abrasion resistant steel plate is an abrasion resistant plate with a hardness of 500 HBW. intended for applications where demands are mposed on abrasion resistance in combination with good cold bending properties. GB/T24186 NM500 abrasion resistant steel plate offers very goodweldability.
GB/T24186 NM500 abrasion resistant steel plate is a high-strength wear-resisting steel plate, which has a high abrasion resistance. Brinell hardness value up to 500(HBW) is mainly used to provide protection for wear-resisting occasions or parts, so as to prolong the service life of the equipment, reduce the maintenance and stop caused by maintenance, and correspondingly reduce the investment of funds.
| 仕様 | GB/T24186 NM500 abrasion resistant steel plate |
| 標準 | GB/T24186 |
| Specialize | Shim Sheet, Perforated Sheet, B. Q. Profile. |
| 長さ | 50mm-18000mm |
| 幅 | 50mm-4020mm |
| 厚さ | 1.2mm-300mm |
| 硬度 | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
プロファイル: 図面によると。
検査: 化学分析、金属組織学的分析、機械分析、超音波試験、衝撃試験、硬度試験、表面品質および寸法レポート。
MOQ: 1個。
Supplementary Technology: Brinell hardness, HBW according to EN ISO 6506-1, on a milled surface 0,5–2 mm below plate surface per heat and 40 tons. Tests are made for every variation of 15 mm in the thickness of plates from the same heat.
技術データ
NM500 is a high-strength wear-resistant steel, which has a high wear resistance, Brinell hardness value reaches 500 (HBW) mainly in the need to wear the occasion or location to provide protection to the equipment longer life, reduced maintenance brought maintenance and downtime, and the corresponding reduction of capital investments.
GB/T24186 NM500 abrasion resistant steel plate chemical composition
| ブランド | C | そして | ん | P | S | Cr | モー | で | B | CEV |
| NM360 | ≤0.17 | ≤0.50 | ≤1.5 | ≤0.025 | ≤0.015 | ≤0.70 | ≤0.40 | ≤0.50 | ≤0.005 | |
| NM400 | ≤0.24 | ≤0.50 | ≤1.6 | ≤0.025 | ≤0.015 | 0.4~0.8 | 0.2~0.5 | 0.2~0.5 | ≤0.005 | |
| NM450 | ≤0.26 | ≤0.70 | ≤1.60 | ≤0.025 | ≤0.015 | ≤1.50 | ≤0.05 | ≤1.0 | ≤0.004 | |
| NM500 | ≤0.38 | ≤0.70 | ≤1.70 | ≤0.020 | ≤0.010 | ≤1.20 | ≤0.65 | ≤1.0 | Bt: 0.005-0.06 | 0.65 |
GB/T24186 NM500 abrasion resistant steel plate mechanical properties
| ブランド | Thickness mm | Tensile Test MPa | 硬度 | |||||||
| YS Rel MPa | TS Rm MPa | 伸長 ％ | ||||||||
| NM360 | 10-50 | ≥620 | 725-900 | ≥16 | 320-400 | |||||
| NM400 | 10-50 | ≥620 | 725-900 | ≥16 | 380-460 | |||||
| NM450 | 10-50 | 1250-1370 | 1330-1600 | 20以上 | 410-490 | |||||
| NM500 | 10-50 | — | —- | ≥24 | 480-525 | |||||
Processing Technique
- Electric Furnace Steelmaking
- LF Refining
- VD Vacuum Treatment
- Continuous casting and rolling
- Accelerated Cooling
- Thermal Treatment
- Ware-house-in Inspection
生産能力：月産3,000トン。
テスト: 化学分析、金属組織学的分析、機械分析、超音波試験、衝撃試験、硬度試験、表面品質および寸法レポート。
パッケージ
バンドルまたはピース。
ミルの試験証明書
EN 10204/3.1 と関連するすべてのデータ登録。化学。構成、メカ。特性とテスト結果。
Heat treatment: quenching and tempering (quenching and tempering).
NM500 wear-resistant steel is widely used construction machinery, mining machinery, mining machinery, environmental protection machinery, metallurgical machinery, abrasives, bearings and other product components.
