C31600
PRODUCT DESCRIPTION:. Leaded Commercial Bronze (nickel-bearing)
テンパー: H02 ハーフハード、H04 ハード
SOLIDS: 3/8″ to 2″ O.D.
六角: 外径 3/8 インチ~2 インチ
標準長さ: 144インチ
一般的な用途
BUILDERS HARDWARE: hardware
ELECTRICAL: connectors
FASTENERS: fasteners, nuts, screws
INDUSTRIAL: screw machine parts
C31600 high copper brass alloy is a high copper content brass alloy with a copper content of up to 85-89%. In addition, C31600 alloy also contains 1.5-3% of aluminum, manganese, iron and other elements. The addition of these elements increases the strength and hardness of the alloy while maintaining its good machinability and corrosion resistance.
C31600 alloy has good electrical conductivity, and its electrical conductivity can be as high as 30-34%IACS. The alloy has a density of 8.8 g/cm³, making it slightly lighter than copper. Its thermal conductivity is high, 122 W/mK, which is about 20% higher than ordinary brass. This allows C31600 alloy to maintain good thermal conductivity in high temperature environments and is widely used in the manufacture of thermal components.
C31600 alloy has a tensile strength of 440-570 MPa and a high elongation of 40-50%. This makes it ideal for manufacturing high-strength, highly corrosion-resistant parts. In addition, C31600 alloy has a hardness (HV) of 120-170, which is slightly harder than ordinary brass.
類似または同等の仕様
CDA | ASTM | サエ | AMS | 連邦政府 | 軍隊 | 他の |
---|---|---|---|---|---|---|
C31600 | B140 B140M | MIL-V-18436 |
化学組成
Cu% | Pb% | 亜鉛% | Fe% | P% | で% | ||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Chemical Composition according to ASTM B140/B140M-12(2017) Note: Cu + Sum of Named Elements, 99.6% min. Single values represent maximums. | |||||||||||
87.50- 90.50 | 1.30- 2.50 | レム。 | 0.10 | 0.04- 0.10 | 0.70- 1.20 |
被削性
銅合金 UNS No. | 被削性評価 | 密度 (ポンド/インチ)3 68°Fで) |
---|---|---|
C31600 | 80 | 0.320 |
機械的性質
C31600
H02 ハーフハード
SIZE RANGE: 1/2″ DIAMETER AND UNDER
引張強さ、最小 | 降伏強度、荷重下での 0.5% 伸び、最小 | 伸び、2 インチまたは 50 mm 分 | ロックウェル「B」硬度 | 備考 | ||
---|---|---|---|---|---|---|
クシ | MPa | クシ | MPa | % | 典型的なHRB | |
50 | 345 | 30 | 205 | 7 | 61 |
SIZE RANGE: OVER 1/2″ DIAMETER TO 1″ INCLUSIVE
引張強さ、最小 | 降伏強度、荷重下での 0.5% 伸び、最小 | 伸び、2 インチまたは 50 mm 分 | ロックウェル「B」硬度 | 備考 | ||
---|---|---|---|---|---|---|
クシ | MPa | クシ | MPa | % | 典型的なHRB | |
45 | 310 | 27 | 185 | 10 | 61 |
SIZE RANGE: OVER 1″ DIAMETER
引張強さ、最小 | 降伏強度、荷重下での 0.5% 伸び、最小 | 伸び、2 インチまたは 50 mm 分 | ロックウェル「B」硬度 | 備考 | ||
---|---|---|---|---|---|---|
クシ | MPa | クシ | MPa | % | 典型的なHRB | |
40 | 275 | 25 | 170 | 12 | 58 |
C31600
H04 ハード
SIZE RANGE: 2″ DIAMETER AND UNDER
引張強さ、最小 | 降伏強度、荷重下での 0.5% 伸び、最小 | 伸び、2 インチまたは 50 mm 分 | ロックウェル「B」硬度 | 備考 | ||
---|---|---|---|---|---|---|
クシ | MPa | クシ | MPa | % | 典型的なHRB | |
60 | 415 | 50 | 345 | 6 | 72 |
物理的特性
CDA によって提供される物理的特性 | |||||||||||
米国の慣例 | メトリック | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
融点 – 液体 | 1900°F | 1038℃ | |||||||||
融点 – ソリダス | 1850 °F | 1010 °C | |||||||||
密度 | 00.32ポンド/インチ3 68°Fで | 8.86グラム/センチメートル3 20℃で | |||||||||
比重 | 8.86 | 8.86 | |||||||||
電気伝導性 | 68 °F で 32% IACS | 0.187 MegaSiemens/cm at 20 °C | |||||||||
熱伝導率 | 68 °F で 81 Btu/平方フィート/フィート時/°F | 140.2 W/m at 20 °C | |||||||||
熱膨張係数 68-572 | 10.2 · 10-6 °F あたり (68 ~ 572 °F) | 17.6 · 10-6 ℃あたり(20~300℃) | |||||||||
比熱容量 | 068 °F で .09 Btu/ポンド/°F | 377.1 J/kg (20 °C) | |||||||||
引張弾性率 | 17000 ksi | 117212MPa |
製造特性
CDA が提供する製造プロパティ | |||||||||||
技術 | 適合性 | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
はんだ付け | 素晴らしい | ||||||||||
ろう付け | 良い | ||||||||||
酸素アセチレン溶接 | 推奨されません | ||||||||||
ガスシールドアーク溶接 | 推奨されません | ||||||||||
被覆金属アーク溶接 | 推奨されません | ||||||||||
スポット溶接 | 推奨されません | ||||||||||
シームウェルド | 推奨されません | ||||||||||
突合せ溶接 | 公平 | ||||||||||
冷間加工能力 | 良い | ||||||||||
熱間成形能力 | 貧しい | ||||||||||
被削性評価 | 80 |
熱特性
CDA によって提供される熱特性 ※温度は華氏で測定されます。 |