C95800 Nickel Aluminum Bronze Tubes: Comprehensive Specifications and Application Guide

1. 化学組成

The C95800 nickel aluminum bronze alloy follows strict compositional requirements as per ASTM B150/B150M standard:

要素	構成範囲(%)
銅	79.0 – 81.5
ニッケル(Ni)	4.0 – 5.0
アルミニウム(Al)	8.5～9.5
鉄(Fe)	3.5 – 4.5
マンガン(Mn)	0.8 – 1.5
シリコン（Si）	0最大.10
鉛(Pb)	0最大.03

2. 機械的性質

Standard mechanical properties at room temperature:

財産	価値	Unit
抗張力	585-760	MPa
降伏強さ	245-485	MPa
伸長	15 (min)	%
硬度	160-190	Brinell
Impact Strength	34	Joules
密度	7.64	g/cm3

3. Standard Dimensions

Common available sizes for C95800 tubes:

Outer Diameter (mm)	Wall Thickness (mm)	Length (m)
15.88 – 25.4	1.65 – 3.38	3 – 6
31.75 – 50.8	2.11 – 4.78	3 – 6
63.5 – 101.6	3.18 – 6.35	3 – 6
114.3～219.1	4.78 – 12.7	3 – 6
273.0 – 406.4	6.35 – 19.1	3 – 6

4. 物性

財産	価値	Unit
溶解範囲	1030-1060	℃
熱伝導率	42	W/m・K
電気抵抗率	13.3	μΩ・cm
熱膨張係数	16.2	μm/m·K
最高動作温度	315	℃

5. Key Applications

5.1 Marine Industry Applications

Propeller shaft sleeves
Pump housings
Valve bodies
Sea water piping systems
Marine hardware components

5.2 Oil & Gas Industry

Offshore platform components
Subsea equipment
Pipeline fittings
ポンプのコンポーネント
Heat exchanger tubes

5.3 Chemical Processing

Chemical transport lines
Process equipment
Reaction vessels
Heat exchanger tubes
Distillation equipment

6. 耐食性

Performance ratings in various environments:

環境	Resistance Rating	注意事項
海水	素晴らしい	Superior resistance to chloride attack
淡水	素晴らしい	Low corrosion rates
工業的な雰囲気	とても良い	Forms protective oxide layer
Acids (mild)	良い	Depends on concentration
Alkalis	とても良い	Suitable for most alkaline environments

7. Manufacturing Standards

Applicable international standards:

標準	説明
ASTM B150/B150M	アルミニウム青銅の棒・棒・形材の標準規格
ASTM B171/B171M	Standard Specification for Copper-Alloy Plate and Sheet
ASTM B467	Standard Specification for Welded Copper-Nickel Pipe
MIL-C-24679	Military Specification for Copper-Nickel-Aluminum Bronze

8. Quality Testing Requirements

テストの種類	Method	頻度
化学分析	Spectrographic Analysis	ヒートごとに
Mechanical Testing	Tensile Test	ロットごと
Dimensional Check	Precision Measurement	100%
非破壊検査	超音波検査	As Required
Hydrostatic Test	Pressure Testing	100%

9. Advantages and Benefits

Key benefits of C95800 tubes:

Superior corrosion resistance in marine environments
Excellent mechanical strength
優れた耐摩耗性
High impact strength
Superior fatigue resistance
良好な機械加工性
Excellent weldability

10. Storage and Handling

Storage recommendations:

側面	Requirement
温度	Room temperature
Humidity	< 60% relative humidity
Storage Position	Horizontal on suitable racks
保護	Cover from dust and debris
Identification	Clear marking and tagging

11. Certifications Required

Common certification requirements:

Certificate Type	説明
Material Test Certificate (EN 10204 3.1)	Chemical and mechanical properties
Manufacturing Process Certificate	Production process details
Quality System Certificate	ISO 9001:2015 compliance
Non-destructive Test Reports	As per customer specification
Third-Party Inspection Reports	When required

12. Maintenance Recommendations

Maintenance Aspect	頻度	Action
Visual Inspection	Quarterly	Check for surface defects
Thickness Measurement	Annually	Ultrasonic testing
クリーニング	As needed	Remove deposits
Corrosion Check	Semi-annually	Inspect critical areas

This comprehensive guide provides essential information for engineers, procurement professionals, and technical specialists working with C95800 nickel aluminum bronze tubes. For specific applications or requirements, please consult with qualified metallurgists or engineering professionals.

C95800 ニッケルアルミニウム青銅管: 包括的な仕様およびアプリケーションガイド

1. 化学組成

2. 機械的性質

3. Standard Dimensions

4. 物性