C87850 Description
Copper silicon UNS C87850 has a copper content of not less than 74%.
Tabulated below are the mechanical properties of UNS C87850 permanent mold cast alloy as a function of heat treatment.
Temperament | Elong. | Rockwell | |||
---|---|---|---|---|---|
B | C | F | 30T | ||
M05 | 21% | 74 | – | – | – |
16% | 70 | – | – | – |
- C87850 Product description: Silicon brass
- Solids: Consult mill for sizes
- Tubes: Consult mill for sizes*
- Rectangles: Consult mill for sizes
- Standard lengths: 144″
- Shape/Form: Semi-finished, mill stock or near net shapes, anode, bar stock, billet/bloom, squares, hex, plate, profile or structural shape, flats/rectangular bar
- Compliance: C87850 is compliant with key legislation including (1) Federal Safe Drinking Water Act – SDWA, (2) S. 3874 Federal Reduction of Lead in Drinking Water Act, (3) California AB1953, and (4) Vermont Act 193
*Informationen zur Wandstärke erhalten Sie beim Hersteller
Typische Verwendungen
Industrial: valve bodies for water
Marine: marine products
Plumbing: faucets, plumbing fittings, water meter cases
Ähnliche oder gleichwertige Spezifikation
CDA | ASTHMA | SAE | AMS | Bundes | Militär | Sonstiges |
---|---|---|---|---|---|---|
C87850 | B505 B505M |
Chemische Zusammensetzung
Cu% | Pb% | Sn% | Zn% | Fe% | P% | In 1 | Mn% | Sb% | Und% | ||
---|---|---|---|---|---|---|---|---|---|---|---|
75.00- 78.00 | 0.02*- 0.09 | 0.30 | Rem. | 0.10 | 0.05- 0.20 | 0.20 | 0.10 | 0.10 | 2,70- 3.40 | ||
Chemical composition according to ASTM B505/B505M-23*Pb content is greater than 0.02%. 1Ni value includes Co.Note: Cu + sum of named elements, 99.5% min. Single values represent maximums. |
Bearbeitbarkeit
Kupferlegierung UNS Nr. | Bearbeitbarkeitsbewertung | Density (lb/in3 at 68 ˚F) |
---|---|---|
C87850 | 70 | 0.3 |
Mechanische Eigenschaften
Zugfestigkeit, min | Yield strength (at 0.5% extension under load,, min) | Dehnung, in 2 Zoll oder 50 mm min | Brinellhärte (500 kg Belastung) | Bemerkungen | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|
ksi | MPa | ksi | MPa | % | minimum BHN | ||||||
65 | 448 | 25 | 172 | 8 | 103 | ||||||
Mechanical properties according to ASTM B505/B505M-23 |
Physikalische Eigenschaften
US-üblich | Metrisch | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Schmelzpunkt – flüssig | 1616 °F | 880 °C | |||||||||
Schmelzpunkt – Solidus | 1571 °F | 855 °C | |||||||||
Dichte | 00,3 lb/in3 bei 68 °F | 8,3 g/cm3 bei 20 °C | |||||||||
Elektrische Leitfähigkeit | 8 % IACS bei 68 °F | 0.046 MegaSiemens/cm bei 20 °C | |||||||||
Wärmeleitfähigkeit | 21,8 Btu/sq ft/ft h/°F bei 68 °F | 37.8 W/m at 20 °C | |||||||||
Wärmeausdehnungskoeffizient 68-212 | 10,3 · 10-6 pro °F (68-212 °F) | 17,8 · 10-6 pro °C (20-100 °C) | |||||||||
Wärmeausdehnungskoeffizient 68-392 | 10,3 · 10-6 pro °F (68-392 °F) | 17,8 · 10-6 pro °C (20-200 °C) | |||||||||
Wärmeausdehnungskoeffizient 68-572 | 10,4 · 10-6 pro °F (68-572 °F) | 18 10-6 pro °C (20-300 °C) | |||||||||
Spezifische Wärmekapazität | 00,09 Btu/lb/°F bei 68 °F | 377,1 J/kg bei 20 °C | |||||||||
Elastizitätsmodul bei Zug | 15200 ksi | 104801 MPa | |||||||||
Von CDA bereitgestellte physikalische Eigenschaften |
Herstellungseigenschaften
Technik | Eignung | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Löten | Exzellent | ||||||||||
Hartlöten | Exzellent | ||||||||||
Autogenschweißen | Gut | ||||||||||
Punktschweißen | Gut | ||||||||||
Nahtschweißung | Gut | ||||||||||
Stumpfschweißung | Gut | ||||||||||
Fähigkeit zur Kaltumformung | Arm | ||||||||||
Fähigkeit zur Warmumformung | Exzellent | ||||||||||
Bearbeitbarkeitsbewertung | 70 | ||||||||||
Von CDA bereitgestellte Herstellungseigenschaften |
Thermische Eigenschaften
Thermal properties provided by CDATemperature is measured in fahrenheit. **For stress relief, Solution treatment and annealing – time is measured in hours/inch of thickness. For precipitation heat treatment – time is measured in hours. |